When composing their Training Plan (PAF), PhD candidates in Methods, Models and Technologies for Engineering must include:
A) some compulsory courses (organized by the University) common to all curricula;
B) some courses to be chosen according to the rules of their own curriculum:
Curriculum in Information Engineering and Electrical Engineering (minimum 12 ECTS):
-
the compulsory module “Mathematical Physics”;
-
at least 1 module from the basic courses listed below;
-
at least 2 modules from the specialist courses listed below.
Curriculum in Civil Engineering and Mechanical Engineering (minimum 12 ECTS):
-
at least 6 specialist modules from those listed below.
Curriculum in Environments and Technologies for Motor Activity and Health (minimum 12 ECTS):
-
at least 6 basic modules from those listed below.
PhD candidates may also choose one or more modules offered in Bachelor’s or Master’s degree programs, or in other PhD Schools in Italy or abroad, provided that the total number of credits for educational activities alone is not less than 24 ECTS (excluding the credits for the compulsory university-wide modules).
For accreditation of courses taken at other institutions, the following criteria apply:
-
a 25-hour course corresponds to 4 ECTS credits;
-
a 15-hour course corresponds to 2 ECTS credits;
-
5 seminars are equivalent to 1 ECTS credit;
-
1 full day of activities within PhD Schools’ joint events is equivalent to 1 ECTS credit, unless otherwise specified by the organizers.
Each instructor will announce at the first lecture the assessment methods for awarding credits, previously agreed with the PhD Coordinator.
The training offer of the PhD Program in Methods, Models and Technologies for Engineering is described below.
Compulsory modules for all curricula (Group A)
The University organizes, for each three-year PhD cycle, a set of training activities corresponding to 8 ECTS per year. Candidates must attend at least 4 ECTS per year from this category. The training activities include basic IT and desktop publishing, as well as technical English.
The English course is held online, consists of 40 hours of lectures and exercises, and is accessible with personal CASI credentials at:
Details of other courses in this category will be published here as soon as available.
It is compulsory to attend 4 ECTS per year, out of the total 8 ECTS offered in this category.
The PhD Program also organizes the following transversal courses which, although not included in the official curriculum, may be added to the students’ individual training plans:
- "Understanding Artificial Intelligence"
- "Introduction to scientific research"
- "Essential Statistics for Doctoral Studies Across Disciplines"
- "Introduction to national and international projects"
- "Scientific research in the light of new technologies in public administration"
C1. Curriculum in Information Engineering and Electrical Engineering
Compulsory Module
Course Title: "Fisica Matematica"
Lecturer: Prof.ssa D. Lacitignola
Credits: 4
Academic year: 2027
Basic Modules
Course Title: "Analisi Funzionale”
Lecturer: Prof.ssa Luisa Faella, Prof.ssa Teresa Scarinci
Credits: 4
Academic year: 2026
Course Title: “Algebra delle matrici”
Lecturer: Prof. A. Corbo Esposito
Credits: 4
Academic year: 2027
Specialist Modules
Course Title: “Bayesian Networks for Engineers (BN4E)”
Lecturer: Prof.ssa A. Scotto di Freca
Credits: 2
Academic year: 2026
Course Title: “Elementi Finiti”
Lecturer: Prof.ssa L. Faella
Credits: 2
Academic year: 2026
Course Title: "Modelli Numerici per i Campi Elettromagnetici”
Lecturer: Prof. A. Tamburrino
Credits: 2
Academic year: 2026
Course Title: "Circuiti per il Calcolo Quantistico”
Lecturer: Prof. A. Tamburrino
Credits: 2
Academic year: 2026
Course Title: “Natural computations for engineering applications (NC4EA)”
Lecturer: Prof. F. Fontanella
Credits: 2
Academic year: 2026
Course Title: “Object Oriented Design per il Signal Processing”
Lecturer: Prof. C. D’Elia
Credits: 2
Academic year: 2026
Course Title: “I materiali Elettrici”
Lecturer: Prof. P. Varilone
Credits: 2
Academic year: 2026
Course Title: “VHDL per la Sintesi di Circuiti Digitali”
Lecturer: Prof.ssa A. Sanseverino
Credits: 2
Academic year: 2026
Course Title: "Introduzione alle Large Deviations"
Lecturer: Prof. A. Corbo Esposito
Credits: 2
Academic year: 2027
Course Title: “Problemi Inversi e Imaging Elettromagnetico”
Lecturer: prof. A. Tamburrino;
Credits: 2
Academic year: 2027
Course Title: “Programmazione e Applicazioni Avanzate a FPGA”
Lecturer: Prof. R. Di Stefano
Credits: 2
Academic year: 2027
Course Title: “Data acquisition in MATLAB”
Lecturer: Prof. Filippo Milano
Credits: 2
Academic year: 2026
C2. Curriculum in Civil Engineering and Mechanical Engineering
Specialist Modules
Course Title: “Analisi del Rischio Sismico su scala territoriale”
Lecturer: Prof. A. Rasulo
Credits: 2
Academic year: 2026
Course Title: “Modellazione numerica della risposta sismica locale”
Lecturer: dott.ssa A. Chiaradonna dell’Università Federico II di Napoli
Credits: 2
Academic year: 2026
Course Title: “Mechanical behaviour of materials under impulsive loads”
Lecturer: Prof. A. Ruggiero
Credits: 2
Academic year: 2026
Course Title: “Introduction to Cryogenic Engineering”
Lecturer: Prof. C.E. Pagliarone
Credits: 2
Academic year: 2026
Course Title: “Machining nella fabbrica digitale”
Lecturer:l’ing. S. Turchetta
Credits: 2
Academic year: 2026
Course Title: “Tecniche di Identificazione di Dati Omogenei”
Lecturer: Prof. M. D’Apuzzo
Credits: 2
Academic year: 2026
Course Title: “Simulazione della variabilità”
Lecturer: Prof. G. Modoni
Credits: 2
Academic year: 2026
Course Title: “Reliability of Hydraulic Systems”
Lecturer: Prof. Rudy Gargano
Credits: 2
Academic year: 2026
Course Title: “I materiali compositi a matrice ceramica”
Lecturer: Dott. A. Marocco
Credits: 2
Academic year: 2027
Course Title: “Eigenstrain e serie di Fourier per la determinazione dei campi locali e delle proprietà globali dei compositi periodici”
Lecturer: Prof. A. Caporale
Credits: 2
Academic year: 2026
Course Title: “Dinamica dei sistemi meccanici: modellazione e simulazione”
Lecturer: Prof. ssa Chiara Lanni
Credits: 2
Academic year: 2027
Course Title: “Cinematica dei meccanismi: modellazione e simulazione”
Lecturer: Prof. Luciano Tomassi
Credits: 2
Academic year: 2027
Course Title: “Metodologie per l’allocazione dei parametri di affidabilità e manutenibilità di sistemi complessi”
Lecturers: Proff. G. Di Bona e A. Forcina
Credits: 2
Academic year: 2027
Course Title: “Modellazione delle interfacce”
Lecturer: Prof. E. Sacco
Credits: 2
Academic year: 2027
Course Title: “Modellazione numerica di problemi termofluidodinamici”
Lecturer: Ing. G. Grossi
Credits: 2
Academic year: 2027
Course Title: “Potenzialità e limiti dei materiali compositi polimerici”
Lecturer: Proff. L. Sorrentino e W. Polini
Credits: 2
Academic year: 2027
Course Title: ”Strategie di ottimizzazione strutturale: coperture di tipo grid shell ed edifici alti di tipo diagrid”
Lecturer: Prof.ssa V. Tomei
Credits: 2
Academic year: 2027
Course Title: “Tecniche di omogeneizzazione”
Lecturer: Prof.ssa S. Marfia
Credits: 2
Academic year: 2027
Course Title: “Tecniche strumentali per il controllo dei materiali”
Lecturer: Prof.ssa M. C. Mascolo
Credits: 2
Academic year: 2027
Course Title: “Hydrogen Production and Utilization Technologies”
Lecturer: Prof. Davide Lanni
Credits: 2
Academic year: 2027
C3. Curriculum in Environments and Technologies for Motor Activity and Health
Basic modules
Course Title: “Attività motorie adattate all’anziano (mutuato da Corso di Laurea Magistrale LM-67)”
Lecturer: see training program
Credits: 2
Academic year: see training program
Course Title: “Metodologia della ricerca in psicologia generale”
Lecturer: prof. P. Diotaiuti
Credits: 2
Academic year: 2026
Course Title: “Ricerca sociale ed educativa (mutuato da Corso di Laurea Magistrale LM-67)”
Lecturer: see training program
Credits: 2
Academic year: see training program
Course Title: “Metodologia epidemiologica (mutuato da Corso di Laurea Magistrale LM-67)”
Lecturer: see training program
Credits: 2
Academic year: see training program
Course Title: “Misure tecniche del movimento”
Lecturers: proff. C. Cortis-A. Rodio
Credits: 2
Academic year: 2026
Course Title: “Modelli di regressione lineare e logistica”
Lecturers: proff. G. Capelli-B. Federico
Credits: 2
Academic year: 2026
Course Title: “Rappresentazione grafica dei dati motori e sportivi”
Lecturers: proff. G. Capelli-A. Fusco
Credits: 2
Academic year: 2026
Course Title: “Analisi dei dati motori e sportivi”
Lecturers: proff. G. Capelli-A. Fusco
Credits: 2
Academic year: 2027
Course Title: “Metodologia della ricerca nell’esercizio fisico”
Lecturers: proff. C. Cortis-A. Rodio
Credits: 2
Academic year: 2027
Course Title: “Valutazione funzionale nei soggetti fragili: il contributo della tecnologia in un approccio integrato e multidisciplinare”
Lecturers: proff. T. Di Libero-A. Rodio
Credits: 2
Academic year: 2026
Course Title: “Statistica inferenziale e analisi di regressione”
Lecturers: proff. G. Capelli-B. Federico
Credits: 2
Academic year: 2027
Course Title: “Valutazioni di usabilità in ergonomia cognitiva”
Lecturer: prof. P. Diotaiuti
Credits: 2
Academic year: 2027
Course Title: “Pedagogia”
Lecturer: prof. N. Barberis (Università di Catanzaro ‘Magna Grecia’)
Credits: 2
Academic year: 2027