Training Program

When composing their Training Plan (PAF), PhD candidates in Methods, Models and Technologies for Engineering must include:

A) some compulsory courses (organized by the University) common to all curricula;

B) some courses to be chosen according to the rules of their own curriculum:

 

Curriculum in Information Engineering and Electrical Engineering (minimum 12 ECTS):

  • the compulsory module “Mathematical Physics”;

  • at least 1 module from the basic courses listed below;

  • at least 2 modules from the specialist courses listed below.

Curriculum in Civil Engineering and Mechanical Engineering (minimum 12 ECTS):

  • at least 6 specialist modules from those listed below.

Curriculum in Environments and Technologies for Motor Activity and Health (minimum 12 ECTS):

  • at least 6 basic modules from those listed below.

PhD candidates may also choose one or more modules offered in Bachelor’s or Master’s degree programs, or in other PhD Schools in Italy or abroad, provided that the total number of credits for educational activities alone is not less than 24 ECTS (excluding the credits for the compulsory university-wide modules).

For accreditation of courses taken at other institutions, the following criteria apply:

  • a 25-hour course corresponds to 4 ECTS credits;

  • a 15-hour course corresponds to 2 ECTS credits;

  • 5 seminars are equivalent to 1 ECTS credit;

  • 1 full day of activities within PhD Schools’ joint events is equivalent to 1 ECTS credit, unless otherwise specified by the organizers.

Each instructor will announce at the first lecture the assessment methods for awarding credits, previously agreed with the PhD Coordinator.

The training offer of the PhD Program in Methods, Models and Technologies for Engineering is described below.


Compulsory modules for all curricula (Group A)

The University organizes, for each three-year PhD cycle, a set of training activities corresponding to 8 ECTS per year. Candidates must attend at least 4 ECTS per year from this category. The training activities include basic IT and desktop publishing, as well as technical English.

The English course is held online, consists of 40 hours of lectures and exercises, and is accessible with personal CASI credentials at:

https://studente.unicas.it/

Details of other courses in this category will be published here as soon as available.

It is compulsory to attend 4 ECTS per year, out of the total 8 ECTS offered in this category.

The PhD Program also organizes the following transversal courses which, although not included in the official curriculum, may be added to the students’ individual training plans:

  • "Understanding Artificial Intelligence"
  • "Introduction to scientific research"
  • "Essential Statistics for Doctoral Studies Across Disciplines"
  • "Introduction to national and international projects"
  • "Scientific research in the light of new technologies in public administration"

 

C1. Curriculum in Information Engineering and Electrical Engineering

Compulsory Module

Course Title: "Fisica Matematica"

Lecturer: Prof.ssa D. Lacitignola

Credits: 4

Academic year: 2027

 

Basic Modules

Course Title: "Analisi Funzionale”

Lecturer: Prof.ssa Luisa Faella, Prof.ssa Teresa Scarinci

Credits: 4

Academic year: 2026

 

Course Title: “Algebra delle matrici”

Lecturer: Prof. A. Corbo Esposito

Credits: 4

Academic year: 2027

 

Specialist Modules

Course Title: “Bayesian Networks for Engineers (BN4E)”

Lecturer: Prof.ssa A. Scotto di Freca

Credits: 2

Academic year: 2026

 

Course Title: “Elementi Finiti”

Lecturer: Prof.ssa L. Faella

Credits: 2

Academic year: 2026

Course Title: "Modelli Numerici per i Campi Elettromagnetici”

Lecturer: Prof. A. Tamburrino

Credits: 2

Academic year: 2026

 

Course Title: "Circuiti per il Calcolo Quantistico”
Lecturer: Prof. A. Tamburrino
Credits: 2
Academic year: 2026

 

Course Title: “Natural computations for engineering applications (NC4EA)”

Lecturer: Prof. F. Fontanella

Credits: 2

Academic year: 2026

 

Course Title: “Object Oriented Design per il Signal Processing”

Lecturer: Prof. C. D’Elia

Credits: 2

Academic year: 2026

 

Course Title: “I materiali Elettrici”

Lecturer: Prof. P. Varilone

Credits: 2

Academic year: 2026

 

Course Title: “VHDL per la Sintesi di Circuiti Digitali”

Lecturer: Prof.ssa A. Sanseverino

Credits: 2

Academic year: 2026

 

Course Title: "Introduzione alle Large Deviations"

Lecturer: Prof. A. Corbo Esposito

Credits: 2

Academic year: 2027

 

Course Title: “Problemi Inversi e Imaging Elettromagnetico”

Lecturer: prof. A. Tamburrino;

Credits: 2

Academic year: 2027

 

Course Title: “Programmazione e Applicazioni Avanzate a FPGA”

Lecturer: Prof. R. Di Stefano

Credits: 2

Academic year: 2027

 

Course Title: “Data acquisition in MATLAB”

Lecturer: Prof. Filippo Milano

Credits: 2 

Academic year: 2026

 


C2. Curriculum in Civil Engineering and Mechanical Engineering

 

Specialist Modules

Course Title: “Analisi del Rischio Sismico su scala territoriale”

Lecturer: Prof. A. Rasulo

Credits: 2

Academic year: 2026

 

Course Title: “Modellazione numerica della risposta sismica locale”

Lecturer: dott.ssa A. Chiaradonna dell’Università Federico II di Napoli

Credits: 2

Academic year: 2026

 

Course Title: “Mechanical behaviour of materials under impulsive loads”

Lecturer: Prof. A. Ruggiero

Credits: 2

Academic year: 2026

 

Course Title: “Introduction to Cryogenic Engineering”

Lecturer: Prof. C.E. Pagliarone

Credits: 2

Academic year: 2026

 

Course Title: “Machining nella fabbrica digitale”

Lecturer:l’ing. S. Turchetta

Credits: 2

Academic year: 2026

 

Course Title: “Tecniche di Identificazione di Dati Omogenei”

Lecturer: Prof. M. D’Apuzzo

Credits: 2

Academic year: 2026

 

Course Title: “Simulazione della variabilità”

Lecturer: Prof. G. Modoni

Credits: 2

Academic year: 2026

 

Course Title: “Reliability of Hydraulic Systems”

Lecturer: Prof. Rudy Gargano

Credits: 2

Academic year: 2026

 

Course Title: “I materiali compositi a matrice ceramica”

Lecturer: Dott. A. Marocco

Credits: 2

Academic year: 2027

 

Course Title: “Eigenstrain e serie di Fourier per la determinazione dei campi locali e delle proprietà globali dei compositi periodici”

Lecturer: Prof. A. Caporale

Credits: 2

Academic year: 2026

 

Course Title: “Dinamica dei sistemi meccanici: modellazione e simulazione”

Lecturer: Prof. ssa Chiara Lanni

Credits: 2

Academic year: 2027

 

Course Title: “Cinematica dei meccanismi: modellazione e simulazione”

Lecturer: Prof. Luciano Tomassi

Credits: 2

Academic year: 2027

 

Course Title: “Metodologie per l’allocazione dei parametri di affidabilità e manutenibilità di sistemi complessi”

Lecturers: Proff. G. Di Bona e A. Forcina

Credits: 2

Academic year: 2027

 

Course Title: “Modellazione delle interfacce”

Lecturer: Prof. E. Sacco

Credits: 2

Academic year: 2027

 

Course Title: “Modellazione numerica di problemi termofluidodinamici”

Lecturer: Ing. G. Grossi

Credits: 2

Academic year: 2027

 

Course Title: “Potenzialità e limiti dei materiali compositi polimerici”

Lecturer: Proff. L. Sorrentino e W. Polini

Credits: 2

Academic year: 2027

 

Course Title: ”Strategie di ottimizzazione strutturale: coperture di tipo grid shell ed edifici alti di tipo diagrid”

Lecturer: Prof.ssa V. Tomei

Credits: 2

Academic year: 2027

 

Course Title: “Tecniche di omogeneizzazione”

Lecturer: Prof.ssa S. Marfia

Credits: 2

Academic year: 2027

 

Course Title: “Tecniche strumentali per il controllo dei materiali”

Lecturer: Prof.ssa M. C. Mascolo

Credits: 2

Academic year: 2027

 

Course Title: “Hydrogen Production and Utilization Technologies”

Lecturer: Prof. Davide Lanni

Credits: 2

Academic year: 2027

 


C3. Curriculum in Environments and Technologies for Motor Activity and Health

 

Basic modules

Course Title: “Attività motorie adattate all’anziano (mutuato da Corso di Laurea Magistrale LM-67)”

Lecturer: see training program

Credits: 2

Academic year: see training program

 

Course Title: “Metodologia della ricerca in psicologia generale”

Lecturer: prof. P. Diotaiuti

Credits: 2

Academic year: 2026

 

Course Title: “Ricerca sociale ed educativa  (mutuato da Corso di Laurea Magistrale LM-67)”

Lecturer: see training program

Credits: 2

Academic year: see training program

 

Course Title: “Metodologia epidemiologica (mutuato da Corso di Laurea Magistrale LM-67)”

Lecturer: see training program

Credits: 2

Academic year: see training program

 

Course Title: “Misure tecniche del movimento”

Lecturers: proff. C. Cortis-A. Rodio

Credits: 2

Academic year: 2026

 

Course Title: “Modelli di regressione lineare e logistica”

Lecturers: proff. G. Capelli-B. Federico

Credits: 2

Academic year: 2026

 

Course Title: “Rappresentazione grafica dei dati motori e sportivi”

Lecturers: proff. G. Capelli-A. Fusco

Credits: 2

Academic year: 2026

 

Course Title: “Analisi dei dati motori e sportivi”

Lecturers: proff. G. Capelli-A. Fusco

Credits: 2

Academic year: 2027

 

Course Title: “Metodologia della ricerca nell’esercizio fisico”

Lecturers: proff. C. Cortis-A. Rodio

Credits: 2

Academic year: 2027

 

Course Title: “Valutazione funzionale nei soggetti fragili: il contributo della tecnologia in un approccio integrato e multidisciplinare”

Lecturers: proff. T. Di Libero-A. Rodio

Credits: 2

Academic year: 2026

 

Course Title: “Statistica inferenziale e analisi di regressione”

Lecturers: proff. G. Capelli-B. Federico

Credits: 2

Academic year: 2027

 

Course Title: “Valutazioni di usabilità in ergonomia cognitiva”

Lecturer: prof. P. Diotaiuti

Credits: 2

Academic year: 2027

 

Course Title: “Pedagogia”

Lecturer: prof. N. Barberis  (Università di Catanzaro ‘Magna Grecia’)

Credits: 2

Academic year: 2027